The lines on parking lots are often taken for granted by most people because they think that the application process is as simple as painting any surface. That is not true because painting parking lots takes a lot of planning to ensure both convenience and safety to people who use the space. Proper planning also ensures that the curb appeal of the property is improved while complying with all local and federal laws that govern the industry. When in need of Striping Houston should be visited.
The procedure for marking parking spaces is so sophisticated and normally has a lot of steps unknown to many and hence it is vital to get a professional for the job. One should hire a company that has technical expertise, experience in the job, equipment and labor. Also the contractor needs to be conversant with the local laws as well as federal laws so that they comply with them.
The procedure of lot marking begins with preparing the area. To make sure that the paint sticks properly, it is vital to prepare the surface adequately. In the event the surface has dirt, it should be removed by a number of methods. One of the ways is using a high pressure washer which is able to eradicate most types of dirt.
When the prepared surface is ready for paint application, the team should then begin to plan where and how the lines are applied. One might select to have the aisle designed such that it can allow for two-way or one-way traffic. The size of space and traffic flow in the location might determine if the design of the isle is two-way or one-way.
The plan must entail consideration of the safety of both drivers and pedestrians. In order to avoid collision, space in the parking lot should be sufficient. These spaces ought to be adequately broad so that drivers are able to move in and out with convenience. The length and width of spaces that cars are parked in are normally determined by federal and local standards.
There are various kinds of paints that can be used for this purpose. The kind of surface being painted usually determines the kind of paint to be used. New or sealed asphalt pavements usually do well with water-based paints. On the contrary, rubber-based paints do best on concrete pavements. There are several other kinds of surfaces and paints and one must research to ensure that they are using the right paints.
The paint used on parking lots is subjected to surface wear and tear, which removes it over time as the space is used. Spaces that experience heavy traffic usually wear out sooner than those with little traffic. In general, the lot will require to be repainted after every two years. The general rule used in this industry is to apply new paint if the general visibility of the paint reduces by 25 percent.
Normally, the paint dries really fast. Within a period of only half an hour the paint will have dried. As a precaution, the lot should however not be opened for use within the hour. The reason is that some places might not have dried properly within the thirty minutes.
The procedure for marking parking spaces is so sophisticated and normally has a lot of steps unknown to many and hence it is vital to get a professional for the job. One should hire a company that has technical expertise, experience in the job, equipment and labor. Also the contractor needs to be conversant with the local laws as well as federal laws so that they comply with them.
The procedure of lot marking begins with preparing the area. To make sure that the paint sticks properly, it is vital to prepare the surface adequately. In the event the surface has dirt, it should be removed by a number of methods. One of the ways is using a high pressure washer which is able to eradicate most types of dirt.
When the prepared surface is ready for paint application, the team should then begin to plan where and how the lines are applied. One might select to have the aisle designed such that it can allow for two-way or one-way traffic. The size of space and traffic flow in the location might determine if the design of the isle is two-way or one-way.
The plan must entail consideration of the safety of both drivers and pedestrians. In order to avoid collision, space in the parking lot should be sufficient. These spaces ought to be adequately broad so that drivers are able to move in and out with convenience. The length and width of spaces that cars are parked in are normally determined by federal and local standards.
There are various kinds of paints that can be used for this purpose. The kind of surface being painted usually determines the kind of paint to be used. New or sealed asphalt pavements usually do well with water-based paints. On the contrary, rubber-based paints do best on concrete pavements. There are several other kinds of surfaces and paints and one must research to ensure that they are using the right paints.
The paint used on parking lots is subjected to surface wear and tear, which removes it over time as the space is used. Spaces that experience heavy traffic usually wear out sooner than those with little traffic. In general, the lot will require to be repainted after every two years. The general rule used in this industry is to apply new paint if the general visibility of the paint reduces by 25 percent.
Normally, the paint dries really fast. Within a period of only half an hour the paint will have dried. As a precaution, the lot should however not be opened for use within the hour. The reason is that some places might not have dried properly within the thirty minutes.
About the Author:
You can find a detailed list of the advantages and benefits of using professional parking lot striping Houston services at http://www.semperstriping.com right now.
0 التعليقات:
Post a Comment